Aqua Quip Lights Flush Mounted

HOME | ABOUT | PRODUCTS | CONTACT US

Evo2 multi-colour LEDs in use

Builder: Pride Pools

Evo2 LED Flush Mounted Retro-Fit Pool Lights allow a simple upgrade from Aqua-Star Halogen and Spectrum MK1 Flush Mounted lights. Available in Fixed Colour and Multi-Colour Options.

Pool light mounts into the existing Aqua-Star housing.

The Evo2 LED Retro Fit Light is supplied with a factory-sealed light and a Quick Connect Plug Kit.

The plug kit connects to the existing cable and is then connected to the rear of the light by tightening the supplied lock nut.

Reliable Australian-made toroidal-style transformers run quieter, cooler and are 35% more efficient than traditional style transformers.

Aqua-Quip Transformers are robust and reliable and are available in a variety of voltages. 24v and 32v transformers are for replacements only and are not to be used on new pool construction. Transformers comply with AS61558.2.6, ensure they are installed to AS/NZS 3000:2007.

Aqua-Quip Transformers are simple to install, are available in hard-wired and plug-in models and deliver a safe extra low voltage supply to operate either LED or halogen pool lights. For new pools each underwater light must be supplied from an individual transformer (or individual winding on a transformer having a number of secondary windings). To facilitate the simple installation of multiple lights in a single pool Aqua-Quip supplies transformers with either 2 x secondary 50va outputs (#APL502) or 4 x secondary 50va outputs (#APL504). The circuit capacity of the outputs must not be exceeded.

Weather-proof (IP65) Range

240V / 12V, 100VA

240V / 12V, 200VA

240V / 22V, 150VA

240V / 32V, 150VA

Splash-proof (IP64) Range

240V / 12V, 100VA*

240V / 12V, 200VA*

*supplied with 3-pin plug

APL502 runs up to 2 x 50va lights.

APL504 runs up to 4 x 50va lights.

Download documents in
Adobe PDF format

Evo2 for Concrete Pools Installation & Specs

Evo2 for Fibreglass Pools Installation & Specs

LED Programming Guide

Aqua-Star/Evo2 Replacement Light Kit Manual

Aqua-Star Halogen for Fibreglass Pools

Introducing the new Evo2 pool lighting system, the latest advancement in pool lighting technology.

The Evo2 pool lighting system combines many unique features resulting in a spectacular, ultra reliable lighting system that is user friendly and easy to install.

These LED lights are available in fixed colour white, blue, green and multi-colour with multiple colour changing programs.

The beauty of the Evo2 is that the lights sit flush with the pool wall making them totally unobtrusive. The lights are stylish and modern, making them ideal for all types of water features, spas, fountains, waterfalls, beach areas, ponds and catch tanks.

The elegance of the lighting system can be enhanced with the addition of the optional stainless steel trim ring, creating some spectacular visual effects. The Evo2 system is supplied with the latest generation LED technology and industrial strength transformer to ensure maximum light output. In addition, Evo2 lights are energy efficient and have a rated life of up to 50,000 hours. The entire system is extra low voltage to ensure safety at all times.

Fibreglass and Vinyl Pools

Evo2 LED Pool Lights for Fibreglass and Vinyl Pools fit through a 4” (102mm) hole and are supplied with the Quick Connect Cable pre-fitted to the pool light. The pool light is supplied fitted inside the fibreglass/vinyl housing. The housing is factory fitted with 1 metre of cable wound up inside. Supplied with lock nut and gaskets, ready to install. Stainless Steel Trim Ring Kits are available as an optional extra.

Evo2 LED Lights for ConcretePools

Aqua-Star Halogen Flush Mounted Pool Lights are secured inside a recessed housing in the pool wall making them stylish, modern and totally unobtrusive.

The lights are fitted with a 12v 50w MR16 halogen lamp and are supplied with quick-fit blue and green lenses. Easily enhanced with the addition of the mirror polished 316 Stainless Steel Trim Ring Kits.

The Aqua-Star Flush Mounted pool lighting system combines many unique features resulting in a spectacular, reliable lighting system that is user friendly and easy to install.

The lights are compact, stylish and modern making them ideal for all types of water features; spas, fountains, water falls, beach areas, and catch tanks.

The lights are extra low voltage and are designed and made in Australia.